Error creating thumbnail: File missing Join our Discord!
If you have been locked out of your account you can request a password reset here.

Colt AR-15 Identification Guide: Difference between revisions

From Internet Movie Firearms Database - Guns in Movies, TV and Video Games
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 117: Line 117:


===A1===
===A1===
The first variant to be fitted with a a forward assist (which has a tear-drop shaped plunger head as opposed to the round plunger used on later rifles). This is the only upper to feature a forward assist without brass deflector.
The first variant to be fitted with a forward assist (which has a tear-drop shaped plunger head as opposed to the round plunger used on later rifles). This is the only upper to feature a forward assist without brass deflector.
[[File:Upper A1.jpg|thumb|400px|none|]]
[[File:Upper A1.jpg|thumb|400px|none|]]


Line 247: Line 247:
==Bayonet Lug==
==Bayonet Lug==
The bayonet lug on AR-15 rifles is a small protrusion under the front of the gas block. This is present on the majority of Colt AR-15 military rifles, but is omitted from carbines without barrels long enough to support a bayonet. It is also absent from a number of civilian rifles, such as the Match Target rifles, to comply with various laws and regulations.
The bayonet lug on AR-15 rifles is a small protrusion under the front of the gas block. This is present on the majority of Colt AR-15 military rifles, but is omitted from carbines without barrels long enough to support a bayonet. It is also absent from a number of civilian rifles, such as the Match Target rifles, to comply with various laws and regulations.
[[Category:General Information]]
[[File:Bayonet yes.jpg|thumb|400px|none|Front sight block with bayonet lug]]
[[File:Bayonet yes.jpg|thumb|400px|none|Front sight block with bayonet lug]]
[[File:Bayonet no.jpg|thumb|400px|none|Front sight block without bayonet lug]]
[[File:Bayonet no.jpg|thumb|400px|none|Front sight block without bayonet lug]]
[[Category:Firearm identification guides]]

Latest revision as of 14:20, 7 July 2023

This page is intended as a guide to identify the various Colt manufactured M16 variants and derivatives. This is not a complete list of all variants produced by Colt, and only contains those variants that have appeared in media. Due to the large number of companies that make AR-15 pattern rifles that are nearly indistinguishable from the original variants, all rifles should be identified using Colt terminology in the absences of any information to the contrary, such as unique parts or visible receiver markings. The preferred term for identification, be it the model name or simply the model number, is highlighted in bold.

Weapon Name Model Number Upper Receiver Lower Receiver Stock Barrel Length Barrel Profile Flash Hider Bayonet Lug Image
AR-15 601 Slickside Slabside Solid fixed 20" A1 Duckbill Yes Error creating thumbnail: File missing
M16 602 Slickside Slabside Solid fixed 20" A1 3 Prong Yes Error creating thumbnail: File missing
XM16E1 603 A1 Partial fence Solid fixed 20" A1 3 Prong Yes Error creating thumbnail: File missing
M16A1 603 A1 Full fence Solid fixed (early)
A1 fixed (late)
20" A1 A1 Yes Error creating thumbnail: File missing
USAF M16 604 Slickside Partial fence (early)
Full fence (late)
Solid fixed (early)
A1 fixed (late)
20" A1 3 Prong (early)
A1 (late)
Yes Error creating thumbnail: File missing
CAR-15 SMG 607 Slickside Partial fence 1st gen. collapsible 10" A1 3 Prong (early)
3.5" moderator (late)
No Error creating thumbnail: File missing
CAR-15 SMG 607A A1 Partial fence (early)
Full fence (late)
1st gen. collapsible 10" A1 3.5" moderator (early)
4.25" moderator (late)
No Error creating thumbnail: File missing
XM177E1 609 A1 Partial fence (early)
Full fence (late)
2nd gen. collapsible 10" A1 4.25" moderator No Error creating thumbnail: File missing
XM177 or GAU-5/A 610 Slickside Partial fence (early)
Full fence (late)
2nd gen. collapsible 10" A1 4.25" moderator No Error creating thumbnail: File missing
M16 614 Slickside Full fence A1 fixed 20" A1 A1 Yes Error creating thumbnail: File missing
XM177E2 629 A1 Full fence 2nd gen. collapsible 11.5" A1 4.25" moderator
(Grenade ring)
No Error creating thumbnail: File missing
GAU-5A/A 630 Slickside Partial fence (early)
Full fence (late)
2nd gen. collapsible 11.5" A1 4.25" moderator
(Grenade ring) (early)
A1 (late)
No Error creating thumbnail: File missing
9mm SMG DOE 633 SMG Full fence 3rd gen. collapsible 7" A1 None No Error creating thumbnail: File missing
9mm SMG 635 SMG Full fence 3rd gen. collapsible 10.5" A1 A1 Yes Error creating thumbnail: File missing
M16A2 645 A2 Full fence A2 fixed 20" A2 A2 Yes Error creating thumbnail: File missing
M16A1 Carbine 653 A1 Full fence 2nd gen. collapsible 14.5" A1 A1 Yes Error creating thumbnail: File missing
M16A1 Carbine 654 Slickside Full fence 2nd gen. collapsible 14.5" A1 A1 Yes Error creating thumbnail: File missing
M16A1 Special High Profile 655 A1 Partial fence A1 fixed 20" HBAR A1 Yes Error creating thumbnail: File missing
M16A1 Special Low Profile 656 A1 flat top Partial fence A1 fixed 20" HBAR A1 Yes Error creating thumbnail: File missing
M16A2 or
Diemaco C7
715 A1E1 Full fence A2 fixed 20" A2 A2 Yes Error creating thumbnail: File missing
M16A2 Carbine 723 A1E1 Full fence 3rd gen. collapsible 14.5" A1
M4 (late)
A2 Yes Error creating thumbnail: File missing
M16A2 Carbine 727 A2 Full fence 3rd gen. collapsible 14.5" M4 A2 Yes Error creating thumbnail: File missing
M16A2 Commando 733 A1 (early)
A1E1 (early)
A2 (late)
Full fence 3rd gen. collapsible (early)
4th gen. collapsible (late)
11.5" A1 or A2 A1 or A2 Yes or no Error creating thumbnail: File missing
M16A2 LMG or
Diemaco C7 LSW
750 A2 LMG Full fence A2 fixed 20" LMG A1 No Error creating thumbnail: File missing
M4 920 Flat top Full fence 3rd gen. collapsible (early)
4th gen. collapsible (late)
14.5" M4 A2 Yes Error creating thumbnail: File missing
M4A1 921 Flat top Full fence 4th gen. collapsible 14.5" M4 A2 Yes Error creating thumbnail: File missing
M4 Commando 933 Flat top Full fence 3rd gen. collapsible (early)
4th gen. collapsible (late)
11.5" A1 or A2 A2 Yes or no Error creating thumbnail: File missing
M16A4 945 Flat top Full fence A2 fixed 20" A2 A2 Yes Error creating thumbnail: File missing
M16A3 LMG or
Diemaco C7A1 LSW
950 Flat top LMG Full fence A2 fixed 20" LMG A2 Yes Error creating thumbnail: File missing
9mm SMG 991 Flat top SMG Full fence 4th gen. collapsible 10.5" A1 A2 Yes Error creating thumbnail: File missing
M231 None Slickside
(sightless)
Full fence None 15.6" A1 A1 No Error creating thumbnail: File missing
AR15 Sporter (SP1) R6000 Slickside Slabside
(screw pin)
Solid fixed (early)
A1 fixed (late)
20" A1 3 Prong (early)
A1 (late)
Yes Error creating thumbnail: File missing
AR-15 Sporter (SP1) Carbine R6001 Slickside Slabside
(screw pin)
3rd gen. collapsible 16" A1 A1 Yes Error creating thumbnail: File missing
AR-15A2 Sporter II Carbine R6420 A1 (early)
A1E1(late)
A2 (last)
Slabside
(screw pin)
2nd gen. collapsible (early)
3rd gen. collapsible (late)
16" A1 A1 (early)
A2 (late)
Yes Error creating thumbnail: File missing
AR-15 9mm Carbine R6450 SMG Full fence 3rd gen. collapsible 16" A1 A1 Yes Error creating thumbnail: File missing
AR-15A2 Sporter II R6500 A1 (early)
A1E1(late)
A2 (last)
Slabside
(screw pin)
A2 fixed 20" A2 A2 Yes Error creating thumbnail: File missing
AR-15A2 Government Carbine R6520 A2 Full fence 3rd gen. collapsible 16" A1 A2 Yes Error creating thumbnail: File missing
AR-15A2 Sporter Lightweight R6530 A2 Full fence A2 fixed 16" A1 A2 No Error creating thumbnail: File missing
AR-15A2 HBAR R6550 A2 Full fence A2 fixed 20" HBAR A2 Yes Error creating thumbnail: File missing
AR-15A2 Government Carbine AR6520 A2 Full fence 4th gen. collapsible 16" A1 A2 Yes Error creating thumbnail: File missing
AR-15 Sporter Match HBAR AR6601 A2 Full fence A2 fixed 20" HBAR A2 No Error creating thumbnail: File missing
AR-15A3 Tactical Carbine AR6721 Flat top Full fence 4th gen. collapsible 16" HBAR A2 Yes Error creating thumbnail: File missing
Match Target HBAR MT6601 A2 Full fence A2 fixed 20" HBAR Target crown No Error creating thumbnail: File missing
Match Target Competition HBAR MT6700 Flat top Full fence A2 fixed 20" HBAR Target crown No Error creating thumbnail: File missing
Match Target Competition HBAR II MT6731 Flat top Full fence A2 fixed 16" HBAR Target crown No Error creating thumbnail: File missing
Law Enforcement Carbine LE6920 Flat top Full fence 4th gen. collapsible 16" M4 A2 Yes Error creating thumbnail: File missing


Glossary

Upper Receivers

Slickside

The earliest version of the AR-15 upper receiver which can easily be identified by its lack of forward assist and brass deflector. This receiver was used on the original M16, USAF weapons, and the SP1 civilian rifle.

Error creating thumbnail: File missing

A1

The first variant to be fitted with a forward assist (which has a tear-drop shaped plunger head as opposed to the round plunger used on later rifles). This is the only upper to feature a forward assist without brass deflector.

Error creating thumbnail: File missing

A1 Flat Top

A unique upper receiver used only on the Model 656 Special Low Profile sniper rifle. It features an integral Weaver scope rail and lower profile folding backup rear sight.

Error creating thumbnail: File missing

A1E1

An intermediate receiver that was an A1 receiver with the addition of a brass deflector behind the ejection port. It can be distinguished from the A2 receiver by its simpler rear sight. This upper was the one that was chosen by Diemaco (now Colt Canada) for the C7 rifle and C8 carbine. It was also commonly used on the Model 723 and 733 carbines.

Error creating thumbnail: File missing

A2

This upper was first implemented on the M16A2. It notably differs from its predecessor, the A1 upper, by the addition of a brass deflector and a more complicated range adjustable rear sight. Also replaced the A1's 'teardrop' forward assist button with a round one.

Error creating thumbnail: File missing

Flat Top

Essentially an A2 upper with the fixed carry handle replaced with a MIL-STD-1913 scope rail. It can often be seen fitted with a carry handle that is most often of the same design as the A2 upper. This is the upper that is used on the majority of current military, law enforcement and civilian rifles.

Error creating thumbnail: File missing

A2 LMG

A unique upper receiver fitted only to the Model 750. Externally it appears as an A2 upper with the forward assist omitted (being an open bolt weapon, a forward assist would be pointless).

Error creating thumbnail: File missing

Flat Top LMG

A unique upper receiver fitted only to the Model 950. Externally it appears as a flat top upper with the forward assist omitted (being an open bolt weapon, a forward assist would be pointless).

Error creating thumbnail: File missing

SMG

The upper receiver used on the 9x19mm submachine guns and carbines is actually a modified slickside upper (a forward assist is not necessary due to the simpler and more reliable blowback action), fitted with a distinctive semi-circular brass deflector over the rear of the ejection port (which is pinned to the receiver and removable, as opposed to the integrally forged one found on 5.56x45mm rifles) and a correspondingly shortened dust cover. The reason for this enlarged deflector is due to the fact that as the SMG is a straight blowback weapons a relatively large amount of gas blasts out of the ejection port, which would be uncomfortable for a left handed shooter if not redirected.

Error creating thumbnail: File missing

Flat Top SMG

A flat top variant of the original SMG upper with the same removable brass deflector, this is the upper which is used on the current range of submachine guns and carbines.

Error creating thumbnail: File missing

Slickside (Sightless)

A unique upper receiver found only on the M231 firing port weapon. It is identical to the slickside upper used on the original M16 but features no rear sight, being designed to be aimed using tracer fire. It does however retain the carry handle that the rear sight is normally mounted in along with the windage direction arrows for adjusting the absent sight, due to it being made from a regular slickside forging without the final machining for the rear sight.

Error creating thumbnail: File missing

Lower Receivers

Slabside

Used only on the AR-15 prototypes and the original M16, the slabside lower can be identified by the lack of any ridges on the right side of the weapon. The push pin at the front of the lower receiver either has a flat round head, or a round head with a circular divot in the centre.

Error creating thumbnail: File missing
Slabside lower receiver with push pin front pivot

Slabside (Screw Pin)

A variant of the slabside receiver with a screw pin at the front of the receiver is used on early Sporter models up to the AR-15A2 Sporter II. This variant of the slabside lower receiver is much more common than the genuine military slabside lower, meaning it is often used as a stand in for the correct M16 lower receiver in television and movies.

Error creating thumbnail: File missing
Slabside lower receiver with screw pin front pivot

Partial Fence

Most notably used on the XM16E1, although also used on a number of contemporary carbines and experimental weapons, the partial fence lower features a horizontal ridge under the ejection port, a captive push pin at the front pivot, and an unfenced magazine release button. The term partial fence is a misnomer as the ridge on the side of the receiver is unrelated to the magazine release button, but is instead a housing for the detent spring which retains the new push pin. The partial fence name has only been applied retroactively in relation to the later full fence lower.

Error creating thumbnail: File missing
partial fence lower receiver

Full Fence

The full fence lower is the standard receiver used on all AR-15s since the M16A1. It can be identified by the raised fence around the magazine release button on the right side of the weapon which is designed to lessen the chances of accidentally releasing the magazine. The design of this lower was upgraded with the adoption of the M16A2 featuring strengthening around the front and rear receiver push pins and fire selector marking on the right side of the receiver. However, due to the difficulty in identifying them from a distance and the fact that different manufacturers use slightly different designs (such as strengthening around only the front push pin or omitting the selector markings on the right side of the weapon), these have been treated as one variant for the purpose of identification. The full fence lower (both A1 and A2) is also the receiver used on Colt's 9mm SMG. For this purpose it is modified with several holes drilled in the side, which are used to pin spacers in place to hold the smaller 9mm magazine in the standard 5.56mm magazine well.

Error creating thumbnail: File missing
A1 full fence lower receiver
Error creating thumbnail: File missing
A2 full fence lower receiver
Error creating thumbnail: File missing
A2 SMG full fence lower receiver

Pistol Grips

There are two distinct mil-spec pistol grips used on AR-15 & M16 series rifles; the first one, used with the original AR-15 and all variants through the M16A1, is relatively smooth and has light checkering on the sides as well as a hole in the bottom-front of the grip that acts as a sling swivel mounting point (though was rarely if ever used in this fashion).

The second grip, introduced with the M16A2 and standard issue on all subsequent Colt rifles, adds a finger step between the middle and ring fingers, filled in the useless sling swivel hole at the bottom-front of the grip, has heavier checkering on the sides, and has ridging on the back for a better grip.

Error creating thumbnail: File missing
Original pistol grip on A1 lower
Error creating thumbnail: File missing
A2 pistol grip on A2 lower

Stocks

Solid Fixed

Original Colt rifles had a solid stock without an internal storage compartment and one piece butt pad. This stock can also be identified by hinged rear sling loop. This stock was used on the original M16 and early models of the M16A1 until 1971 when it was replaced by the A1 type stock.

Error creating thumbnail: File missing

A1 Fixed

An improved stock designed for the M16A1, this introduced an internal storage compartment into the stock accessed by a textured trapdoor in the butt pad. The original hinged rear sling loop was also replaced by a simpler and more robust fixed loop. Despite being commonly known as the A1 stock it was not designed until 1971 (the M16A1 was released in 1967) so early model M16A1s retained the earlier solid stock with hinged sling loop.

Error creating thumbnail: File missing

A2 Fixed

The M16A2 used a new stock that was slightly longer (16mm, nearly indistinguishable to the regular observer) and made from a much stronger material. The easiest way to differentiate this stock from that found on the M16A1 is the squarer edges on the butt pad, and the fact that the butt pad is chequered over its entire surface (as opposed to the A1 stock which was only textured on the trapdoor cover).

Error creating thumbnail: File missing

1st Generation Collapsible

This stock resembles a miniature fixed stock, but can be extended by operating a lever inside the butt pad. The only weapon it was used on was the Model 607 Car-15 SMG, and was abandoned for a simpler, cheaper and more robust design for all future carbines.

Error creating thumbnail: File missing

2nd Generation Collapsible

A stock made from aluminum with a black polymer coating was used on the majority of carbines from the Vietnam war until 1985. Position adjustment is accomplished by depressing a lever on the underside of the stock, releasing it once the stock is adjusted to the desired length. It also has two cutouts ahead of the butt plate above and below the buffer tube to allow a sling to be wrapped around the stock in lieu of a standard sling loop.

Error creating thumbnail: File missing

3rd Generation Collapsible

This stock was introduced in 1985 and is commonly known as the "fiberlite stock". The shape is similar to the early coated aluminum stock but was made from plastic, and can be differentiated by its matte finish (the coated aluminum stocks had a shiny black finish) and the two vertical strengthening ribs on each side. Early models were only two position stocks, but later models were four position. This stock fitted with a thick rubber butt pad is the model which is fitted to Diemaco/Colt Canada weapons, and a version of this modified to be a six position stock is used by the Israeli Defence Force on their carbines.

Error creating thumbnail: File missing

4th Generation Collapsible

Often called the "M4 stock" or "6 position" stock, this was introduced in 2001 as a strengthened variant for use on the M4/M4A1 carbines. It features a number of ridges and recesses on the sides of the stock, a sloped butt plate and the same bottom mounted sling loop found on M16A1/A2 fixed stocks.

Error creating thumbnail: File missing

Wire Collapsible

Developed for emergency dismounted use on the M231 firing port weapon, this wire stock is similar to the one found on the M3 / M3A1 "Grease Gun". Although designed for the M231, it can be fitted to any AR-15 pattern rifle.

Error creating thumbnail: File missing

Flash Hiders

Duckbill

The original AR-15 flash hider, referred to as the “Duckbill”, was only seen on early prototypes. It was quickly abandoned due to the tendency of the front prongs to break off.

Error creating thumbnail: File missing

3 Prong

Also known as the "Improved 3 Prong" to differentiate it from the earlier "Duckbill" used on the original prototypes, this flash hider is a strengthened version with more metal added to the prongs. This was used on the majority of Colt weapons prior to the M16A1.

Error creating thumbnail: File missing

A1

The iconic M16 flash hider often referred to as the “Birdcage”, and was on a closed design to address problems encountered with the duckbill type flash hiders snagging on vegetation. Introduced on the M16A1, it has 6 ports equally distributed around the flash hider.

Error creating thumbnail: File missing

A2

First developed for the M16A2, this flash hider is similar in appearance to the original birdcage except it features five ports spread only over the top half of the flash hider. Although often described as a compensator this was not the intended purpose of the modification, but was instead designed to reduce the amount of material that would be kicked up by the muzzle blast when firing in the prone position.

Error creating thumbnail: File missing

3.5" Moderator

Resembling a small sound suppressor, the 3.5” moderator was designed for the Model 607 (which originally used a duckbill flash hider) in an attempt to mitigate the large muzzle flash and blast created when using such a short barrel. It featured a number of internal baffles to reduce not only the flash but also the sound report, meaning it is classed as a suppressor making civilian use more legally problematic (due to this the majority of moderators seen in film and television are replicas omitting the internal baffles and chambers). Although it succeeded in reducing the flash somewhat it led to excessive fouling in the chamber, along with accuracy problems using tracers.

Error creating thumbnail: File missing

4.25" Moderator

An improved version of the 3.5” moderator, this features a slotted expansion chamber at the end further reducing the weapon report. When used on the longer barrelled carbines such as the Model 629 or Model 630, a flared piece of metal known as a "grenade ring" was normally fitted behind the moderator in place of the lock washer. This had a hollow on the rear face into which the front mount for the XM148 grenade launcher fitted. After the XM148 project was abandoned in favour of the M203, it was discovered that the M203 could coincidentally be mounted to the Model 629/630 by bracing the front mount against the rear of the expansion chamber of the moderator itself, making the grenade ring superfluous and was hence occasionally removed and replaced with a conventional lock washer. This did require some modification to the front mount of the M203 however, and the barrel of the grenade launcher pointed slightly downwards relative to the barrel of the carbine.

Error creating thumbnail: File missing
Early 4.25" moderator without "grenade ring"
Error creating thumbnail: File missing
Later model 4.25" moderator with "grenade ring"

Target Crown

During the Assault Weapons Ban Colt produced a line of weapons known as "Match Target" rifles which did not feature a threaded barrel for a flash hider, instead having the barrel end with a plain target crown.

Error creating thumbnail: File missing

Bayonet Lug

The bayonet lug on AR-15 rifles is a small protrusion under the front of the gas block. This is present on the majority of Colt AR-15 military rifles, but is omitted from carbines without barrels long enough to support a bayonet. It is also absent from a number of civilian rifles, such as the Match Target rifles, to comply with various laws and regulations.

Error creating thumbnail: File missing
Front sight block with bayonet lug
Error creating thumbnail: File missing
Front sight block without bayonet lug